How to tell if the ceiling fan capacitor is bad? 3 Easy Methods

When it comes to ceiling fans, there are a lot of things that can go wrong. One of the most common problems is a bad capacitor. So how do you know if your ceiling fan capacitor is bad? There are a few key signs to look out for. This article will discuss what those signs are and how to fix them.


Why does the capacitor go bad?

There are a few reasons why the capacitor can go wrong. One of the most common reasons is when there is a power surge.

This can happen when there is a lightning storm or when there is an appliance turned on that is drawing a lot of power. Another reason is that the capacitor can overheat. If it’s not properly cooled, it can start to overheat and eventually go bad.

Signs that your ceiling fan’s capacitor may be bad, or how to tell if the ceiling fan capacitor is bad?

A few key signs can indicate that your capacitor is bad. One of the most common signs is a loud noise coming from the fan. This usually means that the capacitor is starting to fail.

Second, if your ceiling fan starts to run slower than usual, or if it starts and stops abruptly, this is also a sign that the capacitor needs to be replaced. Finally, if your ceiling fan starts to smell like it’s burning, this is a sure sign that the capacitor has failed and needs to be replaced immediately.

If you notice any of these signs, it’s best to call a professional to come and take a look at your fan.

How to fix the capacitor

If you notice that your ceiling fan’s capacitor is bad, there are a few things you can do to fix it. First, turn off the power to the fan by unplugging it or turning off the breaker. Once the power is off, you can take the capacitor out of the fan.

Next, you’ll need to test the capacitor to see if it’s still working. There are a few ways to do this. One way is to use a multimeter. Another way is to use a capacitor tester. If the capacitor is no longer working, you’ll need to replace it with a new one.

Once you have a new capacitor, you can put it back in the fan and turn on the power. Once the fan is up and running again, be sure to keep an eye on it to make sure that the capacitor doesn’t go bad again.

How to replace a ceiling fan capacitor?

Over time, the capacitor can become damaged or degraded, causing the fan to spin erratically or not at all. If your ceiling fan is acting up, it’s possible that the capacitor is the problem.

Fortunately, replacing a ceiling fan capacitor is a relatively easy task that can be completed in a matter of minutes.

To replace the capacitor, start by turning off the power to the fan at the breaker box. Next, remove the fan blades and unscrew the housing plate from the motor. With the housing plate removed, you should be able to see the capacitor. Use a screwdriver to disconnect the leads from the old capacitor, then connect the leads to the new capacitor.

Reattach the housing plate and screw it in place, then reattach the fan blades. Finally, turn on the power to the fan and test it to make sure it’s running properly. If everything looks good, you’re done!

If you’re uncomfortable performing this task yourself, or if the capacitor is damaged beyond repair, it’s best to call a professional to do the job for you.

  • Fluke 323 True-RMS Clamp Meter Review (2022)

    If you are in the market to get the best clamp meter for our HVAC services and if you are doing the search rightly, you might have become familiar with Fluke 323 meter till now. Other than HVAC troubleshooting and maintenance, the meter is also the best choice for homeowners who know a thing or […]

  • The Best UEI Clamp Multimeters For Use In Home, Businesses, and Factories – BUYERS GUIDE & Reviews 2022

    You know that feeling when you get one of those calls from work, but then end up not having to go in because your clamp meter died? Yeah. No more sad clamps for me thanks to this list! I’ve got all the best UEI clamp multimeters with their different functions and performances right here at […]

  • Best Clamp Meters for HVAC: Buyer’s Guide and Reviews 2022

    It is easy to identify what kind of electrical system is deployed in your house, offices, or even in an industrial area. Be it the IT industry or a factory, you want to know how much voltage you consume in daily operations at the premises.  How much voltage did I use by your refrigerator and […]

  • 7 Best Multimeters for Computer Repair- Reviews and Buying Guide (2022)

    Are you tired of your computer not working? The world of computers has changed a lot in the last 10 years. For high performance, you need to know how icky your computer is feeling and what it needs to feel better. There are many different types of computer repair jobs and each requires its own […]

  • 7 Best Extech Multimeter Reviews + Buyer’s Guide in 2022

    1.Extech EX330 Autoranging Mini Multimeter 2. Extech EX355 True RMS Professional Multimeter 3.Extech EX470A Professional True RMS Multimeter 4. Extech EX310 Mini Manual Ranging Multimeter When you are just starting with digital multimeters and only want to test the waters, you want a budget-friendly solution for this testing period. How will you feel if this […]

  • Klein Multimeter Reviews- Guide & Comparison in 2022

    Klein is an America-based company producing hand tools like multimeters for more than a century. Its tools are well-known for being affordable, sturdy, and reliable. If you are looking for a multimeter that has standard features and is pocket-friendly, then Klein multimeters are the right choice for you. Below are the four top Klein multimeter […]

  • Klein MM400 vs MM600- Review and Comparison of the 2 Renowned Multimeters (2022)

    So here are Klein MM400 vs MM600, head to head! Klein multimeters are well-designed and measure standard values like the voltage, current, frequency, resistance, etc. with good accuracy. Klein brand has launched different models of multimeters each with different properties. MM400 and MM600 are two popular multimeters. Both have many similar features yet there exist […]

  • Fluke 325 Review- Clamp Multimeter Guide (2022)

    Fluke 325 is one of the leading models of the Fluke 320 series. It has the best feature-set that helps electricians and plant maintenance engineers perform daily tests or measurements. This clamp meter can measure AC/DC amperage up to 400A which is a lot more than an average multimeter. Due to its compact structure, you […]

  • Fluke 115 vs 117 Review- The Main Multimeters’ Comparison Guide

    Multimeters are the standard diagnostic tools used by field service technicians and engineers to measure electric values like current, voltage, and resistance. They help you perform well by providing accurate results. But the accuracy and precision of this beneficial gear highly depend on its quality. We will talk about fluke 115 vs 117 in detail. […]

  • How to test car sensors with a multimeter?

    If you’re a do-it-yourself kind of person, and you own a car, then you’re probably familiar with car sensors. These tiny devices are responsible for transmitting important information to the car’s computer, which in turn helps to keep your car running smoothly. But what do you do if one of your car’s sensors goes bad? […]

  • Car Electrical Diagnostic Tools- What You Should Know Before Considering.

    If you’re like most people, you probably take your car for granted. You get in it, turn the key, and go wherever you need to go. But what if your car broke down? How would you know what was wrong with it? One way to find out is to use a car electrical diagnostic tool. […]

  • Do I need a true RMS multimeter for automotive purposes?

    If you’re an automotive enthusiast, then you know that maintaining your car is key to keeping it running smoothly and looking great. So, when it comes time to buy a multimeter, should you invest in a true RMS model? In this article, we’ll explore the differences between true RMS and regular multimeters, and help you […]

Daniel Wood

Daniel, who is a mechanical engineer and hobbyist mechanic by profession has been specializing in electronic equipment for the past four years. He worked as an engineer at one of these manufacturing plants that specializes exclusively on this type equipment before opening up his own shop where he does research into different machines all day long!